Crown XTI-6000 Amplifier
2 ohm Stereo (per channel): 3,000W
4 ohm Stereo (per channel): 2,100W
8 ohm Stereo (per channel) 1,200W
4 ohm Bridge-Mono 6,000W
8 ohm Bridge-Mono 4,200W
Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
Advanced protection circuitry
Extremely versatile, handling a wide range of speaker impedances and outputs
Switch-mode universal power supply
Speaker presets for crossover frequencies, EQ, limiting, and delay
Speakon and binding post outputs, XLR inputs and loop-thrus
Comprehensive LED status per channel
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz – 20 kHz): +0/-1 dB
Signal to Noise Ratio (below rated 1kHz power at 8 ohms), A-weighted: 103dB
Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
Input stage: Input is electronically balanced and employs precision 1 percent resistors.
AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; at idle draws no more than 180 watts
Crosstalk (below rated power) 20Hz to 1kHz: > 70 dB
Input impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads): Stereo – 2-8 ohms; Bridge mono – 4-16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
Maximum Input Signal: +22 dBu typical
Operating Temperature: 0 degrees C to 40 degrees C at 95 percent relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (+/- 10%): 100V, 120V, 220-240V 50/60 Hz
Ventilation : Flow-through ventilation from front to back
Cooling: Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard 19″ W x 3.5 in” H x 16.2 in D
Net Weight: 24 lbs.
Shipping Weight: 30 lbs.
2 ohm Stereo (per channel): 3,000W
4 ohm Stereo (per channel): 2,100W
8 ohm Stereo (per channel) 1,200W
4 ohm Bridge-Mono 6,000W
8 ohm Bridge-Mono 4,200W
Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
Advanced protection circuitry
Extremely versatile, handling a wide range of speaker impedances and outputs
Switch-mode universal power supply
Speaker presets for crossover frequencies, EQ, limiting, and delay
Speakon and binding post outputs, XLR inputs and loop-thrus
Comprehensive LED status per channel
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz – 20 kHz): +0/-1 dB
Signal to Noise Ratio (below rated 1kHz power at 8 ohms), A-weighted: 103dB
Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
Input stage: Input is electronically balanced and employs precision 1 percent resistors.
AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; at idle draws no more than 180 watts
Crosstalk (below rated power) 20Hz to 1kHz: > 70 dB
Input impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads): Stereo – 2-8 ohms; Bridge mono – 4-16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
Maximum Input Signal: +22 dBu typical
Operating Temperature: 0 degrees C to 40 degrees C at 95 percent relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (+/- 10%): 100V, 120V, 220-240V 50/60 Hz
Ventilation : Flow-through ventilation from front to back
Cooling: Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard 19″ W x 3.5 in” H x 16.2 in D
Net Weight: 24 lbs.
Shipping Weight: 30 lbs.