L-Acoustics LA8 Amplifier
The LA8 amplified controller belongs to the generation of high-end integrated controllers entirely dedicated to the comprehensive operation of
L-ACOUSTICS® loudspeaker systems. The LA8 combines in a 2U lightweight chassis the resources of a 2 x 4 DSP engine driving four channels of
amplification delivering up to 1800 watts each, a comprehensive library of factory presets, a user-friendly front panel interface, two I/O Ethernet
connection ports for network remote control, a connection panel for audio inputs and speaker outputs, and an AES/EBU input board
L-ACOUSTICS® preset library for LA8
K1, K1-SB, KUDO
KARA, ARCS II
SB18, SB28
115XT HiQ
Legacy products: V-DOSC, dV-DOSC, dV-SUB, ARCS, SB118, SB218
Full system drive capability
Factory presets for active and passive modes.
Flexible I/O matrix routing between the two inputs and the four amplified outputs
32-bit floating point DSP, 96 kHz sampling rate
24-bit cascaded A/D converters, 130 dB dynamic range
Combined IIR/FIR algorithms
Adjustable input and output delays
Section dedicated to system equalization using LA NETWORK MANAGER
L-DRIVE excursion and temperature real-time control
Fixed Latency = 3.8 ms
4-channel amplifier
Universal switched mode power supply, 120 / 230 V (or 100 / 200 V for Japan)
4 x 1100 W / 8 Ω at 1% THD, all channels driven (4 x 1300 W peak)
4 x 1800 W/4 or 2.7 Ω at 1% THD, all channels driven (4 x 2500 W peak)
Amplifier gain = 32 dB
The LA8 amplified controller belongs to the generation of high-end integrated controllers entirely dedicated to the comprehensive operation of
L-ACOUSTICS® loudspeaker systems. The LA8 combines in a 2U lightweight chassis the resources of a 2 x 4 DSP engine driving four channels of
amplification delivering up to 1800 watts each, a comprehensive library of factory presets, a user-friendly front panel interface, two I/O Ethernet
connection ports for network remote control, a connection panel for audio inputs and speaker outputs, and an AES/EBU input board
L-ACOUSTICS® preset library for LA8
K1, K1-SB, KUDO
KARA, ARCS II
SB18, SB28
115XT HiQ
Legacy products: V-DOSC, dV-DOSC, dV-SUB, ARCS, SB118, SB218
Full system drive capability
Factory presets for active and passive modes.
Flexible I/O matrix routing between the two inputs and the four amplified outputs
32-bit floating point DSP, 96 kHz sampling rate
24-bit cascaded A/D converters, 130 dB dynamic range
Combined IIR/FIR algorithms
Adjustable input and output delays
Section dedicated to system equalization using LA NETWORK MANAGER
L-DRIVE excursion and temperature real-time control
Fixed Latency = 3.8 ms
4-channel amplifier
Universal switched mode power supply, 120 / 230 V (or 100 / 200 V for Japan)
4 x 1100 W / 8 Ω at 1% THD, all channels driven (4 x 1300 W peak)
4 x 1800 W/4 or 2.7 Ω at 1% THD, all channels driven (4 x 2500 W peak)
Amplifier gain = 32 dB