Meyer Leopard Powered Line Array Speaker
Specifications:
Acoustical:
Operating Frequency Range: 55 Hz – 18 kHz
Phase Response: 92 Hz – 18 kHz ±30 degrees
Maximum SPL: 142 dB
Linear Peak SPL: 133.5 dB with 18 dB crest factor (M-noise), 130 dB (Pink noise), 134.5 dB (B-noise)
Coverage:
Horizontal Coverage: 110°
Vertical Coverage: Varies, depending on array length and configuration
Transducers:
Low Frequency: Two 9-inch long-excursion cone drivers; 2 Ω nominal impedance
High Frequency: One 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM® manifold; 4 Ω nominal impedance
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: XLR 5-pin female input with male loop output
Input Impedance: 10 kΩ differential between pins 2 and 3
Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
Amplifier:
Type: 3-channel, open-loop, class D
Total Output Power: 3900 W peak
THD, IM, TIM: < 0.02%
Cooling: Convection
AC Power:
Connectors: powerCON 20 input with loop output
Automatic Voltage Selection: 90–265 V AC
Safety Agency Rated Operating Range: 100–240 V AC, 50–60 Hz
Turn-on and Turn-off Points: Turn-on: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
Current Draw:
Idle Current: 0.46 A rms (115 V AC); 0.35 A rms (230 V AC); 0.49 A rms (100 V AC)
Maximum Long-Term Continuous Current (>10 sec): 3.0 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
Burst Current (<1 sec): 4.4 A rms (115 V AC); 2.3 A rms (230 V AC) 5.5 A rms (100 V AC)
Maximum Instantaneous Peak Current: 12.6 A peak (115 V AC); 6.3 A peak (230 V AC); 14.5 A peak (100 V AC)
Inrush Current: < 20 A peak
Physical:
Dimensions: W: 26.93 in (684 mm) x H: 11.11 in (282 mm) x D: 21.66 in (550 mm)
Weight: 75 lb (34.0 kg)
Enclosure: Premium multi-ply birch, slightly textured black finish
Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
Rigging: End frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick-release pins that allow 0.5° to 15° splay angles; detachable side and rear handles
Specifications:
Acoustical:
Operating Frequency Range: 55 Hz – 18 kHz
Phase Response: 92 Hz – 18 kHz ±30 degrees
Maximum SPL: 142 dB
Linear Peak SPL: 133.5 dB with 18 dB crest factor (M-noise), 130 dB (Pink noise), 134.5 dB (B-noise)
Coverage:
Horizontal Coverage: 110°
Vertical Coverage: Varies, depending on array length and configuration
Transducers:
Low Frequency: Two 9-inch long-excursion cone drivers; 2 Ω nominal impedance
High Frequency: One 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM® manifold; 4 Ω nominal impedance
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: XLR 5-pin female input with male loop output
Input Impedance: 10 kΩ differential between pins 2 and 3
Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
Amplifier:
Type: 3-channel, open-loop, class D
Total Output Power: 3900 W peak
THD, IM, TIM: < 0.02%
Cooling: Convection
AC Power:
Connectors: powerCON 20 input with loop output
Automatic Voltage Selection: 90–265 V AC
Safety Agency Rated Operating Range: 100–240 V AC, 50–60 Hz
Turn-on and Turn-off Points: Turn-on: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
Current Draw:
Idle Current: 0.46 A rms (115 V AC); 0.35 A rms (230 V AC); 0.49 A rms (100 V AC)
Maximum Long-Term Continuous Current (>10 sec): 3.0 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
Burst Current (<1 sec): 4.4 A rms (115 V AC); 2.3 A rms (230 V AC) 5.5 A rms (100 V AC)
Maximum Instantaneous Peak Current: 12.6 A peak (115 V AC); 6.3 A peak (230 V AC); 14.5 A peak (100 V AC)
Inrush Current: < 20 A peak
Physical:
Dimensions: W: 26.93 in (684 mm) x H: 11.11 in (282 mm) x D: 21.66 in (550 mm)
Weight: 75 lb (34.0 kg)
Enclosure: Premium multi-ply birch, slightly textured black finish
Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
Rigging: End frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick-release pins that allow 0.5° to 15° splay angles; detachable side and rear handles