Meyer ULTRA-X40 IP Powered Speaker
Specifications:
Acoustical:
Operating Frequency Range: 55 Hz – 19.5 kHz
Frequency Response: 56 Hz – 19 kHz ± 4 dB
Phase Response: 90 Hz – 19.5 kHz ±45°
Maximum SPL: 138 dB
Linear Peak SPL: 132.5 dB with 18 dB crest factor (M-noise), 130 dB (Pink Noise), 131 dB (B-noise)
Coverage:
Rotatable horn: 110° x 50°
Transducers:
Low Frequency: Two 8-inch cone drivers; 4 Ω nominal impedance
High Frequency: One 3-inch diaphragm compression driver connected to a rotatable horn; 8 Ω nominal impedance
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Analog Audion Version:
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: XLR 5-pin connectors to accommodate both balanced audio and RMS signals.
Input Impedance: 10 kΩ differential between pins 2 and 3
Nominal Input Sensitivity: 0.0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 oms to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
RMS Network (Optional): Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer.
Physical:
Dimensions: W: 12.51 in (318 mm) x H: 22.31 in (567 mm) x D: 14 in (356 mm); D with handles: 15.38 in (391 mm)
Weight: 52 lb (23.6 kg)
Enclosure: Premium multi-ply birch with slightly textured black finish
Protective Grille: Powder-coated, round-perforated steel
Rigging: 11 integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional accessories for various rigging options (see accessories section).
Specifications:
Acoustical:
Operating Frequency Range: 55 Hz – 19.5 kHz
Frequency Response: 56 Hz – 19 kHz ± 4 dB
Phase Response: 90 Hz – 19.5 kHz ±45°
Maximum SPL: 138 dB
Linear Peak SPL: 132.5 dB with 18 dB crest factor (M-noise), 130 dB (Pink Noise), 131 dB (B-noise)
Coverage:
Rotatable horn: 110° x 50°
Transducers:
Low Frequency: Two 8-inch cone drivers; 4 Ω nominal impedance
High Frequency: One 3-inch diaphragm compression driver connected to a rotatable horn; 8 Ω nominal impedance
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Analog Audion Version:
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: XLR 5-pin connectors to accommodate both balanced audio and RMS signals.
Input Impedance: 10 kΩ differential between pins 2 and 3
Nominal Input Sensitivity: 0.0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 oms to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
RMS Network (Optional): Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer.
Physical:
Dimensions: W: 12.51 in (318 mm) x H: 22.31 in (567 mm) x D: 14 in (356 mm); D with handles: 15.38 in (391 mm)
Weight: 52 lb (23.6 kg)
Enclosure: Premium multi-ply birch with slightly textured black finish
Protective Grille: Powder-coated, round-perforated steel
Rigging: 11 integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional accessories for various rigging options (see accessories section).