Panasonic AW-RP60 Robotic Camera Controller
General
Power Requirements 12 V DC (10.8 V to 13.2 V), 42 V to 57 V DC (PoE power supply)
Current Consumption 0.9 A (XLR connector input), 0.3 A (PoE power supply)
Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Allowable Humidity Ranges 20 % to 90 % (no condensation)
Storage Temperature -20 °C to 50 °C (-4 °F to 122 °F)
Mass 1.5 kg (3.31 lbs)
Dimensions (W x H x D) W 210 mm x H 92 mm x D 177 mm (8-9/32 inches x 3-5/8 inches x 6-31/32 inches)
(excluding protrusions)
Input/Output DC 12 V IN XLR 4‑pin
LAN (RJ-45) (with LED) 10BASE‑T/100BASE-TX, PoE input
Connecting cable: LAN cable, max. 100 m (328 ft)
• When connecting the unit via a switching hub:
Straight cable (category 5e), STP (Shielded Twisted Pair) cable recommended
• When connecting the unit directly:
Crossover cable (category 5e), STP (Shielded Twisted Pair) cable recommended
• REMOTE:
Available only for LAN (RJ45) control
SERIAL CONT (RJ-45) RS‑422 (control signals for remote cameras), TALLY OUT
Connecting cable:
Straight cable (category 5e), max. 1000 m (3280 ft)
TALLY OUT:
Open collector output (negative logic)
Maximum voltage resistance DC 24 V, Maximum current 50 mA
TALLY/GPIO
(D-sub 25-pin, female,
inch thread) TALLY IN: Contact input (Status operation)
GPIO IN: Contact input (Trigger operation)
GPIO OUT: Open collector output (negative logic)
Maximum voltage resistance DC 24 V, Maximum current 10 mA
LCD Display 3.5 inch LCD (QHD: 960 x 540)
Connection Specifications No. of Connectable Cameras 200 (IP), 5 (RS422)
Remote Camera Selection 5 (6 to 200 controlled from the LCD)
No. of Camera Groups 20 (10 units/group)
No. of Memory Presets 100
General
Power Requirements 12 V DC (10.8 V to 13.2 V), 42 V to 57 V DC (PoE power supply)
Current Consumption 0.9 A (XLR connector input), 0.3 A (PoE power supply)
Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Allowable Humidity Ranges 20 % to 90 % (no condensation)
Storage Temperature -20 °C to 50 °C (-4 °F to 122 °F)
Mass 1.5 kg (3.31 lbs)
Dimensions (W x H x D) W 210 mm x H 92 mm x D 177 mm (8-9/32 inches x 3-5/8 inches x 6-31/32 inches)
(excluding protrusions)
Input/Output DC 12 V IN XLR 4‑pin
LAN (RJ-45) (with LED) 10BASE‑T/100BASE-TX, PoE input
Connecting cable: LAN cable, max. 100 m (328 ft)
• When connecting the unit via a switching hub:
Straight cable (category 5e), STP (Shielded Twisted Pair) cable recommended
• When connecting the unit directly:
Crossover cable (category 5e), STP (Shielded Twisted Pair) cable recommended
• REMOTE:
Available only for LAN (RJ45) control
SERIAL CONT (RJ-45) RS‑422 (control signals for remote cameras), TALLY OUT
Connecting cable:
Straight cable (category 5e), max. 1000 m (3280 ft)
TALLY OUT:
Open collector output (negative logic)
Maximum voltage resistance DC 24 V, Maximum current 50 mA
TALLY/GPIO
(D-sub 25-pin, female,
inch thread) TALLY IN: Contact input (Status operation)
GPIO IN: Contact input (Trigger operation)
GPIO OUT: Open collector output (negative logic)
Maximum voltage resistance DC 24 V, Maximum current 10 mA
LCD Display 3.5 inch LCD (QHD: 960 x 540)
Connection Specifications No. of Connectable Cameras 200 (IP), 5 (RS422)
Remote Camera Selection 5 (6 to 200 controlled from the LCD)
No. of Camera Groups 20 (10 units/group)
No. of Memory Presets 100